Custom MRC Racing 88/01 Civic/Integra OR 88/01 Prelude Adjustable Traction Bar Kit (Bolt in or weld in DIY)
Couldn't load pickup availability
Quality Assurance
Friendly support
Hassle-free returns
Payment details
Help your customers identify what payments are accepted by your store.
Designed to replace the stock crossmember of the Civic EG/EH/EJ/EK/EM & Acura Integra DC.
The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension .
By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop.
For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and increased cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
This Comp/Traction bar kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped with a race grade heim/spherical joint allowing for an OEM fitment that is adjustable to suit all vehicle setups, whether a pre-load is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators.
Due to its slim design it will also accept the use of larger down pipes and manifolds.
Designed to replace the stock crossmember of the Civic EG/EH/EJ/EK/EM & Acura Integra DC.
By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop.
For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and increased cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
This Comp/Traction bar kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped with a race grade heim/spherical joint allowing for an OEM fitment that is adjustable to suit all vehicle setups, whether a pre-load is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching.
- In order to fit this traction bar onto an EM1 Civic you will need the forks & lower control arms of the DX/LX/EX models.
*The weld in kit will only come with Scallop tubes, rod ends, misalignment spacers, serrated plates, new grade 8 hardware, and connecting plates for the control arms. it will be the customer's responsibility to fabricate a lower subframe brace to mount everything to.
*The bolt in kit will only come fully fabricated with all tubing and bolt onto the tow strap pickups on the front frame rails. Scallop tubes, rod ends, misalignment spacers, serrated plates, new grade 8 hardware, and connecting plates for the control arms.
By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and increased cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
This Comp/Traction bar kit is painted for durability and corrosion resistance. Each radius arm is equipped with our race grade heim/spherical joint allowing for an OEM fitment that is adjustable to suit all vehicle setups, whether a pre-load is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators.
Due to its slim design it will also accept the use of larger down pipes and manifolds.
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
We appreciate your business and are committed to providing you with exceptional service and timely delivery. Please review the shipping information below for your order.
Order Processing Time:
Orders are usually processed within 24-48 hours after the order has been placed.
Custom or special order items may take longer to process, typically 3-5 business days.
Shipping Methods:
Standard Shipping (3-7 business days)
Expedited Shipping (2-3 business days)
Express Shipping (1-2 business days)
Packaging:
Rest assured that all items will be securely and safely packaged to prevent any damage during transit. Fragile or high-value parts will be packaged with additional protective materials, such as bubble wrap or foam padding.
Shipping Rates:
Shipping rates vary based on the size, weight, and destination of the package. You can view the estimated shipping costs for your order during the checkout process before placing your order.
Order Tracking:
Once your order has been shipped, you will receive an email with the tracking number and carrier information. You can also track your order status by logging into your account.
International Shipping:
We ship worldwide! Please note that international shipping rates and delivery times may vary based on destination. Customers are responsible for any customs fees, import taxes, or additional charges that may apply.